Customizable Wiring Ducts + Accessories

Wieland Electric is proud to be the exclusive distributor of IBOCO Wiring Ducts and components in Canada. These cable duct systems feature multiple styles of panel ducts with up to 27 duct sizes, and over 40 components and accessories. This combination allows for the simplification and acceleration of panel building operations such as wire retention, identification of equipment/circuits, circuit/wire separation, and the direct mounting of duct and equipment on DIN rails.

CUSTOMIZATION OPTIONS

Save time, reduce scrap, eliminate injuries, and provide quality assurance with custom wire ducts that fit your specific needs.   

All IBOCO wire duct orders of 10 to 10,000 pieces can be customized for length, fingers, hole patterns, and even outfitted with adhesive backing. Contact us today and your custom wire duct can be ready in less than 2 weeks!

Advantages

  • Customizable: length, fingers, hole patterns, and adhesive backing!
  • Expandable and retrofittable
  • Cost, resource, and time-efficient
  • Reusable
  • Restricted slot opening retains wire better
  • Two pre-determined break lines for easily removing finger or finger bases
  • Burr-free edges won’t damage wires
  • Recessed mounting holes for fast component mounting

PART NUMBERS

NAB STANDARD FINGER

NAB ducts reflect the mounting hole configuration of all North America branded wire ducts, for immediate mounting to your panel or enclosure.

North American Base wire ducts are available in:
+  Grey (.0)
+  White (.1)
Part No. Example: 34.296.0510.0 (Grey) or 34.296.0510.1 (White)

TECHNICAL DATA (click to expand)

PART NUMBER NOMINAL SIZE Dimensions in Inches (Actual) Standard Carton
Wieland / Iboco W x H (inch / mm) W H E* F* Quantity
34.296.0506.X / NAB-0506X 1/2” x 5/8” / 15 x 18 0.60 0.71 0.20 0.30 36
34.296.0510.X / NAB-0510X 1/2” x 1” / 15 x 30 0.60 1.18 0.20 0.30 20
34.296.0522.X / NAB-0522X 1/2” x 21/4” / 15 x 60 0.60 2.36 0.20 0.30 16
34.296.1010.X / NAB-1010X 1” x 1” / 25 x 30 1.00 1.18 0.20 0.30 20
34.296.1015.X / NAB-1015X 1” x 11/2” / 25 x 40 1.00 1.57 0.31 0.47 18
34.296.1022.X / NAB-1022X 1” x 21/4” / 25 x 60 1.00 2.36 0.31 0.47 24
34.296.1030.X / NAB-1030X 1” x 3” / 25 x 80 1.00 3.15 0.31 0.47 24
34.296.1040.X / NAB-1040X 1” x 4” / 25 x 100 1.00 3.94 0.31 0.47 8
34.296.1515.X / NAB-1515X 11/2” x 11/2” / 40 x 40 1.57 1.57 0.31 0.47 20
34.296.1522.X / NAB-1522X 11/2” x 21/4” / 40 x 60 1.57 2.36 0.31 0.47 18
34.296.1530.X / NAB-1530X 11/2” x 3” / 40 x 80 1.57 3.15 0.31 0.47 16
34.296.1540.X / NAB-1540X 11/2” x 4” / 40 x 100 1.57 3.94 0.31 0.47 8
34.296.2215.X / NAB-2215X 21/4” x 11/2” / 60 x 40 2.36 1.57 0.31 0.47 12
34.296.2222.X / NAB-2222X 21/4” x 21/4” / 60 x 60 2.36 2.36 0.31 0.47 12
34.296.2230.X / NAB-2230X 21/4” x 3” / 60 x 80 2.36 3.15 0.31 0.47 12
34.296.2240.X / NAB-2240X 21/4” x 4” 60 x 100 2.36 3.94 0.31 0.47 4
34.296.3015.X / NAB-3015X 3” x 11/2” / 80 x 40 3.15 1.57 0.31 0.47 12
34.296.3022.X / NAB-3022X 3” x 21/4” / 80 x 60 3.15 2.36 0.31 0.47 12
34.296.3030.X / NAB-3030X 3” x 3” / 80 x 80 3.15 3.15 0.31 0.47 12
34.296.3040.X / NAB-3040X 3” x 4” / 80 x 100 3.15 3.94 0.31 0.47 4
34.296.3050.X / NAB-3050X 3” x 5” / 75 x 125 2.95 4.92 0.31 0.47 6
34.296.4015.X / NAB-4015X 4” x 11/2” / 100 x 40 3.94 1.57 0.31 0.47 8
34.296.4022.X / NAB-4022X 4” x 21/4” / 100 x 60 3.94 2.36 0.31 0.47 8
34.296.4030.X / NAB-4030X 4” x 3” / 100 x 80 3.94 3.15 0.31 0.47 8
34.296.4040.X / NAB-4040X 4” x 4”  / 100 x 100 3.94 3.94 0.31 0.47 4
34.296.4050.X / NAB-4050X 4” x 5” / 100 x 125 3.94 4.92 0.31 0.47 4
34.296.6040.X / NAB-6040X 6” x 4” / 150 x 100 5.91 3.94 0.31 0.47 4


NAB NARROW FINGER (HIGH DENSITY/HD)

Also available with high-density fingers, NAB ducts reflect the mounting hole configuration of all North American base wire ducts. Can be immediately mounted to your panel enclosure.

High density or narrow finger North American Base wire ducts are available in:
+  White HD (.2)
+  Grey HD (.3)
Part No. Example: 34.296.0510.3 (Grey HD) or 34.296.0510.2 (White HD)

TECHNICAL DATA (click to expand)

PART NUMBER NOMINAL SIZE Dimensions in Inches (Actual) Standard Carton
Wieland / Iboco W x H (inch / mm) W H E* F*  Quantity
34.296.0506.X / NAB-0506X 1/2” x 5/8” / 15 x 18 0.60 0.71 0.16 0.24 36
34.296.0510.X / NAB-0510X 1/2” x 1” / 15 x 30 0.60 1.18 0.16 0.24 20
34.296.0522.X / NAB-0522X 1/2” x 21/4” / 15 x 60 0.60 2.36 0.16 0.24 16
34.296.1010.X / NAB-1010X 1” x 1” / 25 x 30 1.00 1.18 0.16 0.24 20
34.296.1015.X / NAB-1015X 1” x 11/2” / 25 x 40 1.00 1.57 0.16 0.24 18
34.296.1022.X / NAB-1022X 1” x 21/4” / 25 x 60 1.00 2.36 0.16 0.24 24
34.296.1030.X / NAB-1030X 1” x 3” / 25 x 80 1.00 3.15 0.16 0.24 24
34.296.1040.X / NAB-1040X 1” x 4” / 25 x 100 1.00 3.94 0.16 0.24 8
34.296.1515.X / NAB-1515X 11/2” x 11/2” / 40 x 40 1.57 1.57 0.16 0.24 20
34.296.1522.X / NAB-1522X 11/2” x 21/4” / 40 x 60 1.57 2.36 0.16 0.24 18
34.296.1530.X / NAB-1530X 11/2” x 3” / 40 x 80 1.57 3.15 0.16 0.24 16
34.296.1540.X / NAB-1540X 11/2” x 4” / 40 x 100 1.57 3.94 0.16 0.24 8
34.296.2215.X / NAB-2215X 21/4” x 11/2” / 60 x 40 2.36 1.57 0.16 0.24 12
34.296.2222.X / NAB-2222X 21/4” x 21/4” / 60 x 60 2.36 2.36 0.16 0.24 12
34.296.2230.X / NAB-2230X 21/4” x 3” / 60 x 80 2.36 3.15 0.16 0.24 12
34.296.2240.X / NAB-2240X 21/4” x 4” 60 x 100 2.36 3.94 0.16 0.24 4
34.296.3015.X / NAB-3015X 3” x 11/2” / 80 x 40 3.15 1.57 0.16 0.24 12
34.296.3022.X / NAB-3022X 3” x 21/4” / 80 x 60 3.15 2.36 0.16 0.24 12
34.296.3030.X / NAB-3030X 3” x 3” / 80 x 80 3.15 3.15 0.16 0.24 12
34.296.3040.X / NAB-3040X 3” x 4” / 80 x 100 3.15 3.94 0.16 0.24 4
34.296.3050.X / NAB-3050X 3” x 5” / 75 x 125 2.95 4.92 0.16 0.24 6
34.296.4015.X / NAB-4015X 4” x 11/2” / 100 x 40 3.94 1.57 0.16 0.24 8
34.296.4022.X / NAB-4022X 4” x 21/4” / 100 x 60 3.94 2.36 0.16 0.24 8
34.296.4030.X / NAB-4030X 4” x 3” / 100 x 80 3.94 3.15 0.16 0.24 8
34.296.4040.X / NAB-4040X 4” x 4”  / 100 x 100 3.94 3.94 0.16 0.24 4
34.296.4050.X / NAB-4050X 4” x 5” / 100 x 125 3.94 4.92 0.16 0.24 4
34.296.6040.X / NAB-6040X 6” x 4” / 150 x 100 5.91 3.94 0.16 0.24 4


T1 standard ducts are available in white, grey, blue or black. Ducts can also be slotted or solid.

T1 STANDARD FINGER

T1 wire ducts are available in:
+  Grey (.0)
+  White (.1)
Part No. Example: 34.296.0510.0 (Grey) or 34.296.0510.1 (White)

TECHNICAL DATA (click to expand)

PART NUMBER NOMINAL SIZE Dimensions in Inches (Actual) Standard Carton
Wieland / Iboco W x H (inch / mm) W H E* F*  Quantity
34.293.0506.0 / T1-0506G 1/2” x 5/8” / 15 x 18 0.60 0.71 0.20 0.30 20
34.293.0510.0 / T1-0510G 1/2” x 1” / 15 x 30 0.60 1.18 0.20 0.30 20
34.293.0522.0 / T1-0522G 1/2” x 21/4” / 15 x 60 0.60 2.36 0.20 0.30 16
34.293.1010.X / T1-1010X 1” x 1” / 25 x 30 1.00 1.18 0.20 0.30 18
34.293.1015.X / T1-1015X 1” x 11/2” / 25 x 40 1.00 1.57 0.31 0.47 18
34.293.1022.X / T1-1022X 1” x 21/4” / 25 x 60 1.00 2.36 0.31 0.47 24
34.293.1030.X / T1-1030X 1” x 3” / 25 x 80 1.00 3.15 0.31 0.47 24
34.293.1040.X / T1-1040X 1” x 4” / 25 x 100 1.00 3.94 0.31 0.47 8
34.293.1515.X / T1-1515X 11/2” x 11/2” / 40 x 40 1.57 1.57 0.31 0.47 20
34.293.1522.X / T1-1522X 11/2” x 21/4” / 40 x 60 1.57 2.36 0.31 0.47 18
34.293.1530.X / T1-1530X 11/2” x 3” / 40 x 80 1.57 3.15 0.31 0.47 16
34.293.1540.X / T1-1540X 11/2” x 4” / 40 x 100 1.57 3.94 0.31 0.47 8
34.293.2215.0 / T1-2215G 21/4” x 11/2” / 60 x 40 2.36 1.57 0.31 0.47 12
34.293.2222.X / T1-2222X 21/4” x 21/4” / 60 x 60 2.36 2.36 0.31 0.47 12
34.293.2230.X / T1-2230X 21/4” x 3” / 60 x 80 2.36 3.15 0.31 0.47 12
34.293.2240.X / T1-2240X 21/4” x 4” 60 x 100 2.36 3.94 0.31 0.47 4
34.293.3015.0 / T1-3015G 3” x 11/2” / 80 x 40 3.15 1.57 0.31 0.47 12
34.293.3022.X / T1-3022X 3” x 21/4” / 80 x 60 3.15 2.36 0.31 0.47 12
34.293.3030.X / T1-3030X 3” x 3” / 80 x 80 3.15 3.15 0.31 0.47 12
34.293.3040.X / T1-3040X 3” x 4” / 80 x 100 3.15 3.94 0.31 0.47 4
34.293.3050.X / T1-3050X 3” x 5” / 75 x 125 2.95 4.92 0.31 0.47 6
34.293.4015.0 / T1-4015G 4” x 11/2” / 100 x 40 3.94 1.57 0.31 0.47 8
34.293.4022.0 / T1-4022G 4” x 21/4” / 100 x 60 3.94 2.36 0.31 0.47 8
34.293.4030.X / T1-4030X 4” x 3” / 100 x 80 3.94 3.15 0.31 0.47 8
34.293.4040.X / T1-4040X 4” x 4”  / 100 x 100 3.94 3.94 0.31 0.47 4
34.293.4050.X / T1-4050X 4” x 5” / 100 x 125 3.94 4.92 0.31 0.47 4
34.293.6040.X / T1-6040X 6” x 4” / 150 x 100 5.91 3.94 0.31 0.47 4


T1E NARROW FINGER (HIGH DENSITY/HD)

High density or narrow finger T1E wire ducts are available in:
+  White HD (.2)
+  Grey HD (.3)
Part No. Example: 34.296.0510.3 (Grey HD) or 34.296.0510.2 (White HD)

TECHNICAL DATA (click to expand)

PART NUMBER NOMINAL SIZE Dimensions in Inches (Actual) Standard Carton
Wieland / Iboco W x H (inch / mm) W H E* F*  Quantity
34.293.1015.X / T1E-1015X 1” x 11/2” / 25 x 40 1.00 1.57 0.16 0.24 18
34.293.1022.X / T1E-1022X 1” x 21/4” / 25 x 60 1.00 2.36 0.16 0.24 24
34.293.1030.X / T1E-1030X 1” x 3” / 25 x 80 1.00 3.15 0.16 0.24 24
34.293.1040.X / T1E-1040X 1” x 4” / 25 x 100 1.00 3.94 0.16 0.24 8
34.293.1515.X / T1E-1515X 11/2” x 11/2” / 40 x 40 1.57 1.57 0.16 0.24 20
34.293.1522.X / T1E-1522X 11/2” x 21/4” / 40 x 60 1.57 2.36 0.16 0.24 18
34.293.1530.X / T1E-1530X 11/2” x 3” / 40 x 80 1.57 3.15 0.16 0.24 16
34.293.1540.X / T1E-1540X 11/2” x 4” / 40 x 100 1.57 3.94 0.16 0.24 8
34.293.2215.3 / T1E-2215G 21/4” x 11/2” / 60 x 40 2.36 1.57 0.16 0.24 12
34.293.2222.X / T1E-2222X 21/4” x 21/4” / 60 x 60 2.36 2.36 0.16 0.24 12
34.293.2230.X / T1E-2230X 21/4” x 3” / 60 x 80 2.36 3.15 0.16 0.24 12
34.293.2240.X / T1E-2240X 21/4” x 4” 60 x 100 2.36 3.94 0.16 0.24 4
34.293.3015.3 / T1E-3015G 3” x 11/2” / 80 x 40 3.15 1.57 0.16 0.24 12
34.293.3022.X / T1E-3022X 3” x 21/4” / 80 x 60 3.15 2.36 0.16 0.24 12
34.293.3030.X / T1E-3030X 3” x 3” / 80 x 80 3.15 3.15 0.16 0.24 12
34.293.3040.X / T1E-3040X 3” x 4” / 80 x 100 3.15 3.94 0.16 0.24 4
34.293.4015.3 / T1E-4015G 4” x 11/2” / 100 x 40 3.94 1.57 0.16 0.24 8
34.293.4022.3 / T1E-4022G 4” x 21/4” / 100 x 60 3.94 2.36 0.16 0.24 8
34.293.4030.X / T1E-4030X 4” x 3” / 100 x 80 3.94 3.15 0.16 0.24 8
34.293.4040.X / T1E-4040X 4” x 4”  / 100 x 100 3.94 3.94 0.16 0.24 4


Wire Duct Accessories

Wire duct accessories that make installation easier, faster, and safer. 

Get organized with covers, cable attachments, wire retainers, separators, identification tags, wiring duct rivets, and rivet tools that make wire installation a breeze.

Available for T1 and T1E ducts.

CABLE DUCT LID

T1 covers are all non-slip designed for maximum grip with the least encumbrance.
Lids for NAB ducts include a protective, removable film, on sizes 1.5” and above, that is easily removable after lid installation

CABLE DUCT WIRE RETAINER

Keeps wires in during installation, provides additional strain relief for the duct fingers, and eliminates bulging of the sidewall.
Wire retainers that mount to the duct fingers are also available with pre-determined score lines for a quick solution during initial panel installation.

DUCTMARK (IDENTIFICATION TAG)

Snaps onto the sidewall of the T1 and NAB duct series to identify wire/circuits inside of the wire duct
•    Permanent installation
•    Magnified slide for increased visibility
•    Stays on during maintenance or removal of the cover

WIRE DUCT MOUNTING INSERTS

Mount components and separators inside the duct with a simple quarter turn!
•    Separate circuits by mounting smaller ducts inside bigger ducts
•    Stackable!
•    Easily tighten a cable bundle by passing a cable tie through it

Ductfix (Rivets)

Quickly install wiring ducts with standard mounting holes.
•    Elastic Vibration – dampening head
•    Good temperature resistance
•    Excellent mechanic properties
•    Extremely short installation time
•    Insulating – Functional – Easy To Apply
•    Hole size R4 – 5/32” (4 mm) – R6 – 7/32” (5.5 mm)

SEPARATORS

(for T1/ T1E only )
Keeps your wires organized.

RIVET TOOLS

Easily install rivets with one quick push.

DUCT CUTTERS

  • Fast, quiet, and dust-free operation!
  • Heavy-duty stainless steel blade
  • Smooth, burr-free cuts on duct and cover

For large volumes, try our bench-mounted duct cutter.